Green Star tests PHEV

Jan. 1, 2020
Green Star Products, Inc. reports that preliminary testing of its plug-in hybrid electric vehicle (PHEV) has been successfully completed at the Corbin Motor Speedway in Kentucky.

Green Star Products, Inc. reports that preliminary testing of its plug-in hybrid electric vehicle (PHEV) has been successfully completed at the Corbin Motor Speedway in Kentucky.

This was a preliminary test for the full demonstration event scheduled during the first week of June. However, this preliminary test did produce some impressive on-road efficiency data as follows:
1) The test run was designed to simulate an intra-city driving delivery truck route at the test track.

2) The run consisted of 400 laps for a total of 100 miles.

3) The test included eight 10-minute delivery stops and a short lunch break during the 100-mile run.

4) The test vehicle was driven by 3 drivers and included 2 track test drivers and Brooks Agnew, President of Global Green Cars.

5) The PHEV required less than 1 gallon of gasoline for its hybrid engine during the historic run. This equates to over 100 miles per gallon in simulated intra-city driving.

Intra-city driving delivery vehicles are the highest polluters and least energy efficient vehicles in use today on a per mile basis. For example, 85 percent of the huge U.S. Post Office fleet travels less than 13 miles per day yet consumes two to four gallons of gasoline per day. This is equivalent to a mileage of three to six miles per gallon. Compare this to the 100-mile test run of the GSPI plug-in hybrid which demonstrated over 100 miles per gallon at its preliminary test run, the company reports.

About the Author

These are press releases approved by our Aftermarket Business World Editors

Sponsored Recommendations

Learn how ADAS utilizes sensors such as radar, sonar, lidar and cameras to perceive the world around the vehicle, and either provide critical information to the driver or take...
Enhance your collision repair workflow with Autel’s IA900, a process-driven solution integrating precision alignment, bi-directional diagnostics, and ADAS calibration. Designed...
The Autel IA700 is a state-of-the-art and versatile wheel alignment pre-check and ADAS calibration system engineered for both in-shop and mobile applications...
Discover how the investment in an extended-height paint booth is a game-changer for most collision shops with this Free Guide.