CAPA experiences record increases in 2017, adds 6 new manufacturers

Feb. 13, 2018
2017 saw across the board increases in the number of high quality CAPA Certified parts available to the U.S. market.
2017 saw across the board increases in the number of high quality CAPA Certified parts available to the U.S. market. In addition, CAPA has qualified 6 new manufacturers who have passed CAPA’s intense factory approval program.  “Clearly, these 68 CAPA manufacturers see a significant market advantage in meeting CAPA’s quality standards for true functional equivalency,” said CAPA’s Executive Director, Jack Gillis.
Based on distribution of the unique yellow and blue CAPA Quality Seal, manufacturers have increased seal requests by 19% over last year. This is 1,600,000 more than 2016 for a record total of 9,912,000 in 2017. This 19 percent increase significantly exceeded the 12 percent annual average increase CAPA has been experiencing during the past five years. As of the Dec. 31, 2017, CAPA increased the number of part applications in the program by 14 percent with total part applications approved jumping from 23,721 to 27,053. This is second highest number of new part applications added to the program (3332) in CAPA’s 30 year history. These statistics are a strong indication of the importance of CAPA Certified parts to collision shops seeking to keep vehicles repairable without compromising quality. “While shops and insurers are using (and requesting) more and more CAPA Certified parts to reduce the risks associated with aftermarket parts, the big winners are consumers who are getting more fairly priced, high quality parts for their vehicles,” said Gillis. “What is particularly important about these statistics,” said Debbie Klouser, CAPA Director of Operations, “is that the CAPA program requires that all CAPA Certified lights be tested for full compliance with all FMVSS 108 safety requirements and structural bumper parts go through dynamic testing.” Since 1990, CAPA has certified, and collision repairers have installed, nearly 92 million parts. 2018 has CAPA closing in on the 100 million mark, which is a tribute to the commitment of those manufacturers who choose to CAPA Certify their parts and those shops and insurers who insist on the CAPA Seal. CAPA 101_201 Seal (3)The CAPA Seal remains the key to protecting consumers from poor quality and potentially unsafe parts. CAPA’s unique, two-part, seal proves to both consumers and insurers that true quality alternative parts were used. “Given the wide range of quality in alternative parts in the market, it is imperative to Look for the CAPA Seal,” said Gillis.
About the Author

ABRN Wire Reports

These are press releases approved by our ABRN Editors

Sponsored Recommendations

Best Body Shop and the 360-Degree-Concept

Spanesi ‘360-Degree-Concept’ Enables Kansas Body Shop to Complete High-Quality Repairs

How Fender Bender Operator of the Year, Morrow Collision Center, Achieves Their Spot-On Measurements

Learn how Fender Bender Operator of the Year, Morrison Collision Center, equipped their new collision facility with “sleek and modern” equipment and tools from Spanesi Americas...

ADAS Applications: What They Are & What They Do

Learn how ADAS utilizes sensors such as radar, sonar, lidar and cameras to perceive the world around the vehicle, and either provide critical information to the driver or take...

Banking on Bigger Profits with a Heavy-Duty Truck Paint Booth

The addition of a heavy-duty paint booth for oversized trucks & vehicles can open the door to new or expanded service opportunities.