Ford: Aftermarket parts don’t stack up to automaker parts

July 22, 2010

July 22, 2010—A comparison study conducted by Ford Motor Co. found that aftermarket parts are often inferior to those made by automakers. The study was reported in a USA Today article.

Ford compared copy radiator supports and bumper beams, isolators and brackets made for 2004 to 2007 F-150 trucks and 2005 to 2009 Mustangs. Typically, replacement parts are made of steel or magnesium; however, Ford found many were made of plastic.

"These are structural parts of the vehicle, and that makes the concern elevated," said Paul Masse, Ford powertrain and collision product marketing manager.

For example, air bag censors are also attached to these parts, he said. The difference in materials could cause air bags to deploy too slowly or unnecessarily.

Another issue is that consumers are often not told when nonstandard parts are used in a repair, according to Richard Steffen, district director for Rep. Jackie Speier, D-Calif.

"People need to know," he said. "When it comes to safety-oriented parts, we believe they should be told they've got nonfactory parts."

Steffen added that this doesn’t mean only factory parts should be used for repairs, but that standards need to be put in place going forward.

Ford said it will push for some type of standardization and review of aftermarket parts, as well as consumer warnings when nonstandard parts are used during a repair, according to the article.

The findings were presented by Ford representatives Wednesday at the Collision Industry Conference (CIC) in Chicago.  Click the following links to view the official Ford press release_notes, fact sheet and Q&A from the conference presentation.

Sponsored Recommendations

Learn how ADAS utilizes sensors such as radar, sonar, lidar and cameras to perceive the world around the vehicle, and either provide critical information to the driver or take...
Enhance your collision repair workflow with Autel’s IA900, a process-driven solution integrating precision alignment, bi-directional diagnostics, and ADAS calibration. Designed...
The Autel IA700 is a state-of-the-art and versatile wheel alignment pre-check and ADAS calibration system engineered for both in-shop and mobile applications...
Discover how the investment in an extended-height paint booth is a game-changer for most collision shops with this Free Guide.