RELATED
- Ford, Chrysler, GM team up with new hotline for the aftermarket
|
Ford engineers have prepared several tips for drivers to help prevent vehicle, wheel and tire damage inflicted by run-ins with winter’s sprouting potholes:
- Pay special attention to your tire pressure. Keeping tire pressure consistently at the manufacturer’s recommendation will help protect your vehicle’s wheels and tires from being damaged from pothole impacts.
- If safe, don’t swerve to avoid potholes. Swerving can create a situation where the front wheel and tire on the car can impact the edge of the pothole at an obtuse angle, which might do more damage than hitting it squarely.
- If safe, don’t brake just because you see a pothole: Heavy braking compresses the front suspension of the car and will have a tendency to force the tire and wheel down into the pothole instead of gliding over it.
No matter how carefully you drive there’s always the possibility that you may eventually have a flat tire on the highway. Drive slowly to the closest safe area out of traffic. This may further damage the flat tire, but your safety is more important.
If you feel a sudden vibration or ride disturbance while driving, or you suspect your tire or vehicle has been damaged, immediately reduce your speed. Drive with caution until you can safely pull off the road. Stop and inspect the tires for damage. If a tire is under-inflated or damaged, deflate it, remove the wheel and replace it with your spare tire and wheel. If you cannot detect a cause, have the vehicle towed to the nearest repair facility or tire dealer to have the vehicle inspected.
The company notes that its new Ford, Lincoln and Mercury vehicles are subject to stringent testing that can help prevent damage caused by chuckholes. To validate its vehicle designs, Ford has several proving grounds, including those in Romeo, Mich., and Dearborn, Mich., which are filled with different types of carefully designed torture devices designed to test and improve the durability of the entire vehicle.
Ford engineers design the various components up-front to handle potholes in the road as effectively as possible, balancing them for numerous other customer driving conditions, the company reports. To give drivers a fighting chance with monster potholes, engineers tune shock rebound rates to keep the wheel and tire suspended so it can glide over the pothole, preventing the tire from dropping down into it and impacting the edge of the tire and wheel.
For more information, visit www.ford.com.
