Chief Collision Technology and Burke Porter Group Provide Foolproof ADAS Calibration

The Mosaic ADT calibration system is powered by the same end-of-line technology the OEMs use.

Dec. 3, 2019
2 min read

Chief and Burke Porter Group have teamed up to create the Mosaic ADT (Advanced Diagnostic Technology), the industry’s first-ever automated ADAS calibration system that’s powered by the same end-of-line technology that OEMs use. Other systems rely on measuring tape, plumb bobs and manual setup, leaving plenty of room for human error. Why risk it?

 

Chief's Mosaic ADT is Different Because:

• It’s automated. Self-diagnostic target and vehicle sensor checks as well as enhanced radar and laser information sequencing means no manual measurements or adjustments are required.

• It’s future-proof. The state-of-the-art software automatically updates with the latest OEM repair procedures before new vehicle models even hit the street. No reverse-engineering repair procedures are required.

• It’s accurate. Each technician using the Mosaic ADT goes through training and certification to operate the system. Once the OEM scan tool is plugged in, an ASE-certified technician operates it to facilitate remote diagnostics. This provides an added layer of support and protection to ensure error-free calibrations.

It reduces the risk of liability. The Mosaic ADT system captures and records the full calibration process and repair history of a vehicle to document that the OEM repair procedure was followed.

It’s trusted. Product partner Burke Porter Group has almost 30 years of experience developing this same technology that OEMs use for end-of-line calibrations.

 

 For more information on Chief’s Mosaic ADT visit chieftechnology.com/mosaic.

About the Author

Sponsored Content

The views and opinions expressed in this piece do not necessarily reflect those of 10 Missions Media and its associated brands.

Subscribe to our Newsletters

Latest in Chief Automotive Technologies

tool-set
With Chief’s new Meridian™ Align system, shops can maintain control of their customers’ vehicles from blueprinting through final wheel alignment, resulting in better cycle times...
April 17, 2018
tool-set
Real-time feedback allows for precise and efficient adjustments to return to OEM specs
Feb. 22, 2018