CONFERENCE NEWS (CIC 2010): New study shows shops fail to take proper waterborne paint precautions

July 21, 2010
Andrew Johnson reports from the SCRS board of directors meeting at the Collision Industry Conference in Chicago.

CHICAGO, July 21, 2010—Collision repair shops throughout the United States are not taking proper precautions when spraying waterborne paint, according to a study presented during the Society of Collision Repair Specialists (SCRS) board of directors meeting Tuesday.

Fresh air respirators are required for spray painting in an automotive paint booth. Yet only 50 percent of shops in Oregon comply while spraying waterborne paint, reported Paul Val, member of the SCRS board of directors. In Arizona, only 30 percent of shops use fresh air respirators, and just 2 percent of Oklahoma shops do.

Among shops that do comply, many aren’t using the fresh air respirators properly. Filters, cartridges and canisters on the respirator system are used longer than recommended, and often aren’t properly stored, Val said. That poses a real risk to human and environmental health.

“There’s a lot of presumption that it’s OK to breathe waterborne paint because you can’t smell the hazardous materials,” Val said. “There’s a lack of training and a lack of education among repairers regarding waterborne paint.”

Waterborne paint contains isocyanates, a hazardous material that can be breathed, swallowed and absorbed through skin.

In Oklahoma, many shops spraying waterborne paint have switched to using paint booths only for clearcoat applications, Val said, while waterborne paint is sprayed out in the open, on the production floor. The perception is that there is no volatile chemistry in the waterborne product.

Waterborne paints do contain much lower levels of organic solvents and are less toxic than solvent-based paints. But paint manufacturers say automotive paints should always be used with proper control technologies and protective equipment to minimize emissions of air toxins and prevent respiratory, eye and dermal exposures, according to Val.

For more information, go to epa.gov/dfe.

Sponsored Recommendations

ADAS Applications: What They Are & What They Do

Learn how ADAS utilizes sensors such as radar, sonar, lidar and cameras to perceive the world around the vehicle, and either provide critical information to the driver or take...

Banking on Bigger Profits with a Heavy-Duty Truck Paint Booth

The addition of a heavy-duty paint booth for oversized trucks & vehicles can open the door to new or expanded service opportunities.

The Autel IA700: Advanced Modular ADAS is Here

The Autel IA700 is a state-of-the-art and versatile wheel alignment pre-check and ADAS calibration system engineered for both in-shop and mobile applications...

Boosting Your Shop's Bottom Line with an Extended Height Paint Booths

Discover how the investment in an extended-height paint booth is a game-changer for most collision shops with this Free Guide.