Purchasing Body/Frame Repair
2010 Body / Frame Repair
The Champ Deluxe Hydraulic Frame Rotisserie
Auto Body Tool Mart
Details This frame rack tries to eliminate bending and crawling under repair projects. Made of heavy-duty 3/16-inch steel, it has an adjustable mounting width ranging from 7.5 to 10.5 feet, and can lift and rotate a vehicle body or frame for complete underneath access, allowing you to work at a comfortable height.
The Champ Mighty-Pull
Auto Body Tool Mart
Details The Champ Mighty-Pull is a compact and portable 10-ton frame straightener with two adjustable pinchweld clamps that allow for front, rear and side pulls. An optional overhead boom is available for overhead pulls. The pulling tower swivels, the pulling post is removable and the floor beam adjusts for greater versatility.
Details The Cheetah 18 is one of eight frame-straightening machines in Star-A-Liner’s Cheetah series. The machine is designed to be used for anything from unibody cars to extended cab trucks. The 18-foot, drive-on bed tilts and the hydraulic pulling towers are set on wheels to glide around the machine bed.
Dataliner DL2000W—Drive Over Lift & Frame Machine
Details This lift and frame machine allows workers to remain in an upright position while working on rocker panels and bumpers. A vehicle can be mounted on chassis clamps when the lift is lowered onto the wheel stands. The removable 10-ton pulling tower swivels 360 degrees.
Dataliner Laser Aided Tram Gauge
Details This system is capable of measuring height, width, length and cross of a vehicle, and is used for estimating cost and damage after a collision. A universal cross alignment bar attaches to the chassis and a telescopic tram gauge or fan laser attaches to the bar. The portable system weighs 24 pounds.
Details The XL is an extended drive-on bench for use on commercial vehicles. It has 10-ton pulling capabilities and uses two independent, internal lifts, giving the bench a lifting capacity of 9,200 pounds. The model is 19 feet long, includes 51 crossmember positions and features milled surfaces for fixturing and measuring.
Details This frame machine is 20 feet long and combines two of the company’s models, by using two types of pulling towers. Three pivoting towers at one end provide strength and repair width, and two (or three) track-riding towers at the other have 10-ton, 360-degree pulling capabilities.
Vector Frame Pulling System
Details This drive-on frame repair system allows five pulls at once, versus the one- or two-pull options offered by most other pulling systems. Each pull has an 11.2-ton capability and is individually controlled, allowing the operator to pull in any direction. The system is produced by and exclusive to Black Jack.