Shop Floor Tools Tools Technology Solutions Innovations

Cold Repairs in The Body Shop & Glue Pull Repair Technology

Order Reprints

Liability for body-shop owners is real. Nobody wants to see a judgment against them, especially if the problem is preventable.

But “preventable” can entail many things. If the shop owner and his/her employees do not know the most up-to-date body repair techniques, preventing problems immediately becomes more difficult. 

KECO technology is all about avoiding problems, making jobs easier, helping establish great customer relationships, working with insurers for the best outcome, and above all, conducting great repairs.

 

Yesterday Vs. Today

Today’s vehicles are more complicated than ever. Electronics are everywhere, from standard electric windows and doors to keyless entry to anti-theft and anti-collision systems. This includes what used to be relatively simple items: body panels.

In the past, a body panel was simply a painted piece of sheet metal. Today’s panels may be constructed of a composite, plastic, steel, aluminum or a combination of these materials. Panels may be painted conventionally, and they may also have special coatings and insulation on the inside. Then there are the panel electronics. Newer cars and trucks have sensors that cover the perimeter of the vehicle and are used for parking assistance and blind-spot monitoring as well as lane-departure and pre-collision alerts. What used to be a simple piece of metal is now a sophisticated section of the vehicle that performs many functions in addition to serving as a body or wheel covering.

With so much new technology to consider, it’s easy to see how a technician can mess up the body pane,inviting problems like complaints, lawsuits and loss of customers.

The main reason for poor repairs and the loss associated with them is attempting to repair a contemporary body panel with outdated methods. Traditional body repair methods involve welding studs or attaching keys to the panel in order to pull out a dent. This worked great when body panels were simply a piece of sheet metal with nothing problematic behind and nothing on the surface except primer and paint to worry about. If a technician attempts a traditional stud/wiggle wire/weld key method on a contemporary body panel, he immediately raises concerns. You can’t just weld on studs—what if the rear of the panel has wires, insulation or sensors that could be affected, lights that could be damaged, or anti-corrosion material that could catch fire? Even if you were able to somehow use this traditional method on a contemporary panel, what about the e-coat on the surface?

Welcome to cold repairs.

KECO Dec. 2

 

Glue Pull Technology

KECO glue pull repair (GPR) methods are cold repairs. They are revolutionizing body panel repairs by eliminating the need to weld studs while lessening the need for filler, priming, and surface remediation. When the technician employs GPR techniques, he glues a removable attachment, called a tab, to the panel surface and pulls the dent out utilizing various pulling tools. Once the dent is pulled, the tech removes the adhesive and the tab with a simple squirt of release solution.

This non-intrusive method not only avoids welding studs then fixing both these incursions, but it also greatly lessens the potential to damage the panel surface both on the front and backside of the panel. This means less need to re-coat, re-paint, reduced filler, and significantly less blending.

 

Aluminum & Steel

Car and truck manufacturers use aluminum for body panels and structural members. Today they use this metal as a mainstay, and the most popular vehicles in the US will be constructed of aluminum in the near future. For example, the most popular vehicle on the road—the Ford F-150—now uses aluminum alloy in all of its body panels and for the truck bed with up to 29 percent better fuel economy and with the same strength of parts. It appears aluminum body material is here to stay. Does this mean that body shops are compelled to have separate aluminum and steel work areas and buy separate tools to perform the work? Unfortunately, with conventional body repair techniques, the answer is yes. With KECO’s GPR tools and techniques, it’s an emphatic and grateful NO. GPR does not require separate tools or work areas because glue pulling works the same on both aluminum and steel.

KECO collision GPR kits come with a 90-day money back guarantee, free online training, and a continuing support from a network of technicians who use the products every day. To learn more about the power of GPR and cold repairs, visit kecotabs.com/gpr and see how easy it is to improve your business and repair quality. To receive 5 percent off of your next order, enter the promo code: FENDERBENDER5 at checkout. Join the KECO group on Facebook to see more work from real technicians each day.

KECO Dec. 3

Related Articles

The Importance of Lighting for Glue Pull Repairs

Aluminum, Surface Area & Why Glue Pull Repair Works

What is Glue Pull Repair?

You must login or register in order to post a comment.