Running a Shop Technology

Urethane Supply Company Releases New Welding System

Order Reprints

Oct. 7, 2013—The Urethane Supply Company recently released the 6057-C Nitro Fuzer Welding System, a new nitrogen welding technology that combines hot air and nitrogen welding.

The Nitro Fuzer includes fine-flow control regulators on both the air and nitrogen sides. Those are combined with output pressure gauges and a flow gauge to give users control over the amount of gas that is used during the welding process.

The system includes a pressure safety circuit to help prevent burn out in heating elements, an electrically actuated air-nitrogen switch, and a melt-proof silicone and fiberglass braided hot air welder hose.

The Nitro Fuzer also features an integrated airless welding system to allow for smoothing out the nitrogen weld and for repairing thermoset polyurethane.

“It’s a fraction of the cost and time of two-part epoxies,” said Kurt Lammon, president of the Urethane Supply Company. “An average six-inch repair costs about $2 for the plastic welding rod; with epoxy, it could cost over $30.”

The Nitro Fuzer is shipped fully assembled and includes a variety of accessories and an instructional DVD.
 

Related Articles

Urethane Supply Company Introduces New Nitrogen Welding System

Urethane Supply Co. Releases I-CAR Course on Nitrogen Welding

Urethane Supply Names New Distributor

You must login or register in order to post a comment.